background image

6

Need Help?

 Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information 

at 

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service 

contact information is listed at the back of this manual.

PRE-RIDE CHECKLIST

Wheels/Tires 

Practice drift riding only in wide open areas clear from curbs, 

parking blocks and other obstacles. Impacting the wheels 

against any hard surface can damage the wheels. Wheels are 

not covered under your limited warranty.  

Frame, Fork and Steering Wheel 

Check for cracks or broken connections. Although broken frames 

are rare, it is possible for an aggressive rider to run into a curb 

or object and wreck and bend or break a frame. Get in the habit 

of inspecting your Crazy Cart XL on a regular basis.

Hardware/Loose Parts

Before every ride, check all parts, such as nuts, bolts, cables, 

fasteners, etc., to ensure they are secure and assembled 

correctly. There should not be any unusual rattles or sounds from 

loose parts or broken components. If the unit is damaged, do 

not ride. 

Reference “Safety Warnings” on pages 1 and 2 of 

this manual.

Safety Gear 

Always wear proper protective gear, such as an approved safety 

helmet. Elbow pads and kneepads are recommended. Always wear 

athletic shoes (lace-up shoes with rubber soles) and keep shoelaces 

tied and out of the way of the wheels, motor and drive system. 

NEVER RIDE BAREFOOTED OR IN SANDALS.

Laws and Regulations

Always check and obey any local laws or regulations.

Insurance

Do not assume that your existing insurance policies necessarily 

provide coverage for electric product use. Check with your 

insurance company for information regarding insurance.

Summary of Contents for Crazy Cart XL

















Reviews: