WARNING
Need Help?
Visit our website at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday 8:00 AM - 5:00 PM PST.
1
Loosen the three (3) Phillips screws on the chain
guard and remove.
Tools Required:
(
Not included
)
A. Phillips screwdriver
B. Two (2) 16 mm wrenches
Using a Phillips screwdriver, loosen the eight (8)
screws on the motor cover, four (4) on each side,
and remove.
CAUTION:
To avoid potential shock or other injury, turn power switch OFF and disconnect charger
before removing or installing the front wheel/chain. Failure to follow these steps in the correct order
may cause irreparable damage.
Step 2
Step 1
Figure 2
Figure 1
CRAZY CART
FRONT WHEEL/CHAIN
INSTALLATION INSTRUCTIONS
W25143499049
W25143499012
