4
Need Help?
Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
1
Place the handlebars in the
handlebar clamps with tools
and manual.
Note:
Handlebar clamps are
located in the plastic bag.
2
Align parallel to the fork and
tighten the bolts using a 6 mm
Allen wrench. When properly
tightened, the handlebars should
not move forward or backward.
3
Adjust the brake lever adjuster
to the proper place and tighten it
with the 5 mm Allen wrench.
1
Align fender with the hole in
the fork and insert the bolt. Tighten
securely using a 10 mm wrench
and 5 mm Allen wrench.
MX500/MX650 Models
Remove screw from front fork.
Align the number plate with the
hole in the fork and tighten with a
Phillips screwdriver.
SX500 Model
Slip the cables through the slit
on the top of the number plate.
Align the number plate with the
holes on the fork and snap on the
number plate.
Attaching the Handlebars
Tools required: 6 mm Allen wrench
Attaching the Front Fender
Tools required: 10 mm wrench and 5 mm Allen wrench
Attaching the Number Plate
Tools required: Phillips screwdriver
ASSEMBLY AND SET-UP
Note:
Front fender design may vary.