background image

17

Need Help? 

Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information 

at 

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service 

contact information is listed at the back of this manual.

REPAIR AND MAINTENANCE

 Cleaning Your Drift Rider

Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the 

surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the plastic 

components or soften the decals or decal adhesive.

 Battery Care and Disposal

• Do not store in freezing or below freezing temperatures. To properly maintain your battery and ensure maximum 

battery life, carefully read the “Charging the Battery” section on page 8 of this owner’s manual.

• Battery pack should not be disassembled, crushed, punctured, opened or otherwise mutilated.

  

Li-Ion

Disposal: 

Your Drift Rider uses a lithium-ion battery pack which must be recycled or disposed of in an environmentally 

safe manner. Do not dispose of a battery pack in a fire. The battery pack may explode. 
Do not dispose of a battery pack in your regular household trash. The incineration, land filling or mixing of batteries 
with household trash is prohibited by law in most areas. Return exhausted batteries to a federal or state approved 
lithium-ion battery recycler.

 Charger 

 

The charger supplied with the electric product should be regularly examined for damage to the cord, plug, enclosure 

and other parts, and in the event of such damage, the product must not be charged until it has been repaired or 

replaced.

Use ONLY with the recommended charger.

 Wheels

 

Wheels and drive system are subject to normal wear and tear. It is the responsibility of the user to periodically inspect 

wheels for excess wear and adjust or replace drive train components as required. 

 Replacement Parts

 

The most frequently requested replacement parts are available for purchase at some Razor retail partners.  

For the complete selection of replacement parts visit shop.razor.com.

 Repair Centers

 

For a list of authorized Razor repair centers:  

• Check online at www.razor.com. 

• Additional Customer Service contact information is listed on the back of this manual.

Recycling Lithium-ion Batteries: 

Lithium-ion batteries are recyclable. 
You can help preserve our 
environment by returning your 
used rechargeable batteries to the 
collection and recycling location 
nearest you.

For more information regarding 
recycling of rechargeable batteries, 
call toll free 1-800-822-8837,  
or visit http://www.call2recycle.org

Caution:

 Do not handle damaged  

lithium-ion batteries.

Summary of Contents for DRIFT RIDER

























Reviews: