5
ASSEMBLY AND SET-UP
Attaching the Handlebar Unit Cont.
Required Tool:
5 mm Allen wrench
Attaching the Seat
Required Tools:
5 mm Allen wrench, Phillips screwdriver, 13 mm wrench.
3
Reinsert the steering bolt and secure using the
5 mm Allen wrench.
1-1
Insert left foot support into seat.
3-1
Insert right foot support into seat.
1-2
Press firmly until click is heard.
2
Install the four (4) screws (included in bag with
the manual) using the Phillips screwdriver.
WARNING:
Failing to
properly tighten the steering
bolt that attaches the front fork
assembly to the down tube
assembly can cause you to lose
control and fall.
Summary of Contents for DRIFT RIDER
Page 2: ......
