REPAIR AND MAINTENANCE
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
12
Chain and Rear Wheel Replacement (Continued)
Required Tools:
Phillips Screwdriver and Two (2) 19 mm Wrenches
6
Install the new chain or wheel by slipping the chain around the axle. Slide
the axle into the slots on the frame. Slide the chain tensioner onto the rear
sprocket and motor sprocket.
8
Using two (2) 19 mm wrenches, tighten the axle nuts on both sides of the
rear axle.
5
Push downward and remove
the wheel.
9
Using a Phillips screwdriver,
reinstall the chainguard using the
four (4) screws.
10
Using a 5 mm Allen wrench,
reinstall the brake caliper using the
two (2) bolts.
7
Verify that the chain is properly
installed on each sproket.
Note:
the arrangement of the
hardware sequence:
Right Side (Throttle)
16-1 Nut
16-2 Washer
Frame
16-3 Spacer
16-4 Disc Brake Fixing Block
Left Side (Brake)
16-1 Spacer
16-2 Washer
Frame
16-3 Nut
Spacer
Spacer
Disc Brake
Fixing Block
Washer
Washer
Nut
Nut
Summary of Contents for ECOSMART CARGO
Page 2: ......
