Razor ECOSMART CARGO, Owner'S Manual

headline

4

ASSEMBLY AND SET-UP

Need Help?

 Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information 

at 

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer 

Service contact information is listed at the back of this manual.

4

 Attaching the Front Wheel

Required Tools:

 Two (2) 15 mm Wrenches (included)

 Attaching the Handlebars

Required Tool:

 5 mm Allen Wrench (included)

A B

B A

1

 Remove the packing material 

from the front fork. Discard 

packing material.

1

 Face the handlebars forward with 

the throttle on the right and brake 

lever on the left, depress the push 

button 

(A)

 located on the front fork 

and insert the handlebar stem until the 

button locks securely into the stem.

2

 Remove axle nuts 

(A)

 and 

washers 

(B)

 from the axle bolt 

(C)

 and insert the wheel into the 

front fork.

2

 Tighten the collar clamp using a 

5 mm Allen wrench.

3

 Insert the tab on the safety 

washers into the hole on the front 

fork and tighten axle nuts using two 

(2) 15 mm wrenches.

WARNING: 

Failure to 

properly install and tighten the 

collar clamp may allow the 

handlebars to dislodge while riding 

and may cause you to lose control 

and fall. When correctly tightened, 

the handlebars will not rotate out 

of alignment with the front wheel 

under normal circumstances.

Note:

 The cable and wire assembly 

from the handlebar must not be 

wrapped around the steering tube or 

handlebar. Sharp bends or twisting 

of the brake cable can cause the 

brake to malfunction.

C

A