Razor ECOSMART CARGO, Owner'S Manual

headline

6

ASSEMBLY AND SET-UP

6

A

C

B

D

 Installing the Basket 

The passenger seat must be removed before basket installation. Passenger seat and basket cannot be installed on 

EcoSmart Cargo at the same time.  

Required Tool:

 5 mm Allen Wrench (included)

1

 Pull strap on passenger seat.

2

 Open storage compartment.

3

 Using a Phillips screwdriver, 

remove the six (6) screws that 

secure the storage compartment 

and the passenger seat to the 

rear frame. Remove the storage 

compartment and passenger seat 

and store for future use. To reinstall 

passenger seat, reverse steps 1-3.

 Removing the Passenger Seat

Required Tool:

 Phillips Screwdriver (not included)

WARNING: 

The basket 

should not be used to carry people 

or pets.

1

 Slide the basket hooks 

(A)

 under 

the crossbar 

(B)

 located on the rear 

frame.

2

 Align the hole in the basket 

(C)

with the hole on the rear frame 

(D)

. 

Insert the washer and bolt into the 

hole in the basket and through the 

bracket on the rear frame.

3

 Using a 5 mm Allen wrench, 

tighten the bolt until the basket is 

securely attached to the rear frame.

Note:

 For basket removal, reverse 

steps 1-3. After removal, store 

basket for future use.