HEADLINE
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
8
USAGE
8
How to Ride
Once you have charged the battery (see page 6 for charging information):
1. Turn power switch “ON”; put kickstand up and place both hands on the handlebars.
2. Place both hands on the handlebars and place one foot on deck plate. Push scooter forward with other foot while
applying the throttle with right hand
(A)
. Place other foot on deck plate once scooter is in motion.
How to Operate
Do not activate the twist-grip throttle unless you are on the electric scooter and in a safe, outdoor
environment suitable for riding.
How to Stop
1. To stop, release the throttle
(A)
and apply the brake
(B)
until the product comes to a
complete stop
.
2. Make sure to turn the product
OFF
after your ride is complete. Pressing the power switch
(C)
will turn the
product
OFF
completely.
WARNING:
The brake is capable of skidding
the rear tire and throwing an
unsuspecting rider. Practice in an
open area free from obstacles until
you are familiar with the brake
function. Avoid skidding to a stop as
this can cause you to lose control
and/or damage the rear tire.
Note:
As an additional safety
feature, the scooter is designed to
cut power to the motor when the
hand brake is applied.
Note:
Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.
A
A
B
C
