9
QUESTIONS, PROBLEMS,
MISSING PARTS?
This product cannot be returned after it has been unpacked, assembled and used.
Please visit razorgriddle.com or call 1.800.694.0013 before returning to your retailer.
Installing LP Gas Tank
To operate, you will need one precision-filled standard barbecue
grill LP gas tank with external valve threads .
W
CAUTION: LP gas tank must be properly
disconnected and removed prior to moving this
griddle.
Inserting and Securing LP Gas Tank
1. Unfold the upper LP gas tank support.
2. Place precision-filled LP gas tank upright onto the upper and lower LP gas tank
support so the tank valve is facing the gas line connection.
Connecting LP Gas Tank
1. Make sure control knobs are in the “ OFF” position (Figure 2).
2. Before connecting, be sure there is no debris caught in the head of the LP gas tank,
head of the regulator valve or in the head of the burner or burner ports.
3. Connect regulator/hose assembly to tank by turning knob clockwise until it stops.
4. Perform leak test per “Checking for Leaks” section.
Disconnecting LP Gas Tank
1. Make sure control knobs are in the “ OFF”
position (Figure 2).
2. Before disconnecting, make sure the LP gas tank
valve is “CLOSED.”
3. Disconnect regulator/hose assembly from LP gas
tank by turning knob counterclockwise until it is
loose.
W
CAUTION: LP gas tank must be properly
disconnected and removed prior to
moving this griddle.
4. Place the protective cap cover on the LP tank and
store the tank outdoors in a well ventilated area
out of direct sunlight.
20 lb
9 Kg
17.9 in.
/ 45.5 cm
12.2 in. / 31 cm
Operating Instructions
Checking for Leaks
Burner Connections
1. Make sure the regulator hose and valve
connections are securely fastened to the
burner and the tank.
2. Visually check the connection between the
burner/venturi tube and orifice.
3. Make sure the burner/venturi tube fits over the
orifice.
W
WARNING: Failure to inspect this
connection or follow these instructions
could cause a fire or an explosion
which can cause death, serious bodily
injury or damage to property.
4. Please refer to diagram for proper installation
(Figure 1).
5. If the burner/venturi tube does not rest flush
to the orifice, as shown, please contact
1.800.694.0013 for assistance.
Tank/Gas Line Connection
1. Make 2-3 oz. of leak detection solution by
mixing one part liquid dish washing soap with
three parts water.
2. Make sure control knobs are in the “ OFF”
position (Figure 2).
3. Connect LP gas tank per “Installing LP Gas
Tank” section.
4. Turn LP gas tank valve to “OPEN.”
5. Spoon several drops of solution, or use a
squirt bottle, at all “X” locations (Figures 1
and 3).
a. If any bubbles appear, turn LP gas tank
valve to “CLOSED,” reconnect and re-test.
b. If you continue to see bubbles after
several attempts, turn LP gas tank valve
to “CLOSED” and disconnect LP gas tank,
per “Disconnecting LP Gas Tank” section.
Contact 1.800.694.0013 for assistance.
c. If no bubbles appear after one minute, turn
LP gas tank valve to “CLOSED,” wipe away
solution and proceed.
Operating Main Burners
First Use
1. Make sure all labels, packaging and protective
films have been removed from the griddle.
2. Light griddle per “Lighting” section.
3. Remove manufacturing oils before cooking on
this griddle for the first time.
4. Season your griddle per “Seasoning Griddle”
section.
Lighting
W
CAUTION: Keep outdoor gas cooking
appliance area clear and free from
combustible materials, gasoline and
other flammable vapors and liquids.
W
CAUTION: Do NOT obstruct the flow of
combustion and ventilation air.
W
CAUTION: Check and clean burner/
venturi tubes for insects and insect
nests. A clogged tube can lead to a
fire.
W
CAUTION: Do NOT use non-stick
cooking sprays because they contain
a lot of water and can burn onto the
griddle, damaging the surface.
W
CAUTION: Do NOT use corn oil as it contains a high level of sugar,
which can carmelize and burn onto the surface.
1. Check for obstructions of airflow to the burners. Spiders, insects and webs can clog
the burner/venturi tube. A clogged burner tube can lead to a fire.
2. All control knobs must be in the “ OFF” position (Figure 2).
3. Connect LP gas tank per “Installing LP Gas Tank” section.
Figure 1
Figure 2
OFF
HIGH
LOW
Figure 3
X
X
X
X
X
Figure 4
Lighting
Hook
Match
Figure 5
Lighting
Hook
Match
IMPORTANT
Before first use and after each use, always
season your griddle per “Seasoning Griddle”
section.
