background image

2

Never use near steps or swimming pools.

Do not allow hands, feet, hair, body parts, clothing, or similar articles to  

come in contact with moving parts, wheels, or drivetrain, chain while the  

motor is running.

Never use headphones, a cell phone or text when riding.

Never hitch a ride with a vehicle.

Do not ride your Pocket Mod Bellezza in wet or icy weather and never 

immerse the Pocket Mod Bellezza in water, as the electrical and drive 

components could be damaged by water or create other possibly unsafe 

conditions. Never risk damaging surfaces, such as carpet or flooring, by use of 

the Pocket Mod Bellezza indoors.

PROPER RIDING ATTIRE

Always wear proper protective equipment, such as an approved safety helmet 

(with chin strap securely buckled), elbow pads and kneepads. A helmet may be 

legally required by local law or regulation in your area. A long-sleeved shirt, 

long pants, and gloves are recommended. Always wear athletic shoes (lace-up 

shoes with rubber soles) and keep shoelaces tied and out of the way of the 

wheels, motor and drive system. Never ride barefooted or in sandals.

USING THE CHARGER

The charger supplied with the Pocket Mod Bellezza should be regularly 

examined for damage to the cord, plug, enclosure and other parts. In the 

event of such damage, the Pocket Mod Bellezza must not be charged until the 

charger has been repaired or replaced.

Use only with the recommended charger.

Use caution when charging.

The charger is not a toy. Charger should be operated by an adult.

Do not operate charger near flammable materials.

Unplug charger and disconnect from Pocket Mod Bellezza when not in use.

Always disconnect from the charger prior to wiping down and cleaning your 

Pocket Mod Bellezza with damp cloth.

FAILURE TO USE COMMON SENSE AND HEED THE WARNINGS 

INCREASES RISK OF SERIOUS INJURY. USE WITH APPROPRIATE 

CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.

SAFETY WARNINGS

Summary of Contents for POCKET MOD BELLEZZA

















Reviews: