background image

RAZORBACK OFFROAD

12

WARRANTY

Limitation on Warranty
Inventive Edge, LLC dba RazorBack Of

-

froad ™ (RBO) warrants to the original 
purchaser that each new RazorBack 
Offroad™ (RBO) product will be free 
from defects in material and workman-
ship for a period of twelve (12) months 
from date of purchase.

RBO’s obligation under this warran-
ty, statutory or otherwise, is limited 
to the repair or replacement at the 
RBO factory, or at a point designated 
by RBO, of such part or parts as shall 
appear upon inspection by RBO to be 
defective in material or workmanship. 
In no event shall RBO accept such no-

tification later then twelve (12) months 

from date of purchase. This warranty is 
not transferable.

Except as expressly set forth in this 
warranty, RBO makes no other war-
ranty, express or implied, and hereby 
disclaims all other warranties includ-
ing, but not limited to, the implied 
warranties of merchantability and 

fitness for a particular purpose. RBO 

shall in no event be liable for claimed 

downtime, claimed loss of profits or 

goodwill, or any other special, inciden-
tal, indirect, or consequential damages 
concerning or relating to any product 
or parts, whether based on negligence, 
strict liability, breach of contract, 
breach of warranty, misrepresentation, 
or any other legal theory, regardless 
of whether the loss resulted from any 
general or particular requirement 
which RBO knew or had reason to 
know about at the time of sale.

RBO makes no warranty, express or 

implied, as to the finished products 

manufactured or supplied by another 
manufacturer and supplied by RBO to 
purchaser, including, but not limit-
ed to, any boat or vehicle to which 

an RBO product may be affixed or 

any accessories, and RBO expressly 
disclaims any implied warranties of 

merchantability and fitness for a par

-

ticular purpose as to such equipment 
or products. This language shall in no 
way effect or diminish the rights of the 

purchaser to rely on such warranties as are extended by such manufacturers or 
supplies. RBO shall, to the extent permitted under applicable law, pass on to the 
purchaser such manufacturer’s or seller’s warranty.

RBO, who’s policy is one of continuous improvement, reserves the right to im-
prove it’s products through changes in design or materials as it may deem desir-
able without being obligated to incorporate such changes in products previously 
sold.

This warranty is not intended to cover or include the following items, which are 
set forth by way of example and not limitation:

Normal deterioration of trim, paint, lettering, appearance of items due to wear 
or exposure to weather, etc.
Any damage or defect due to accident, misuse, abuse, operation exceeding 
rated loads, Improper or unauthorized repairs, failure to provide reasonable and 
necessary maintenance, or uses of which the equipment was not designed or 
intended.

Alterations or modifications that effect performance, operations, or reliability.

Products Covered

All Products carrying the Razorback Offroad ™ (RBO) name. (All other products 
purchased from other manufacturers are limited to that manufacturer’s warranty.)

RA

Z

O

RB

ACK OFF

R

O

A

D

Summary of Contents for IT FITS

















Reviews: