RAZORBACK OFFROAD
™
2
RECOMMENDED TOOLS FOR INSTALLATION
( Not Included )
RBO1018 - “IT FITS
™”
Adjustable Spare Tire Mount
Made here in Idaho, The RBO “It Fits ™” Adjustable Spare Tire Mount is a true industry first!
With our sliding mounting studs you can easily adjust this mount to accommodate different sized tires
and wheel offsets. Not only did we design this mount to work with 10mm and 12mm wheel lugs we also
include all of the mounting hardware.
When it comes to installation, this mount has our exclusive “It Fits ™” base plate. Just look at any of our
racks and if you see the It Fits Icon you will know this mount will bolt directly onto the rack.
A Warnings
01 Welcome
02
Table of Contents & Product Introduction
03
Parts & Hardware
04
Assembly Instructions
04
Step 1 ......... Determining Length to Set the Mount
04
1.1 Establishing Bore to Surface Measurment
05
Step 2 ......... Setting the Mounting Arm
06
Step 3 .......... Attaching the Base Arm
07
Bore to Surface Measurment Recording Location
08
Step 4 .......... Stud Installation
09
12mm Lugs 4A - 4C
10
10mm Lugs 4A - 4B
11
Final
Assembly
12 Warranty
13
Product Registration
14
RBO 100% Money Back Guarantee
15
Return Policy
16
Contact Information
INTRODUCTION:
• Tape Measure
• Impact Gun
• #3 Phillips Screw Driver
• 7/16” End Wrench
TABLE OF CONTENTS:
PAGE
