1
1
4
3
The sprayer is delivered in a collapsed form. To assemble ready for spraying:
1) Extend the sprayer and securely connect the feed tube
to the flow valve.
3) Remove the atomiser protective cover
and check by hand that the atomiser
disc spins freely.
4)Turn on the switch .
2) Connect the male 3 pole connector
from the lance to the tank female 3 pole
connector
and lock the both connector.
2
5
PREPARING FOR SPRAYING
When applying herbicides with the CDA sprayer the following items MUST be worn:-
It is also recommended to wear:-
•
Disposable coverall OR an apron.
•
Rubber gloves and boots
•
Long Sleeve shirt.
•
Long Trousers.
•
Eye goggles.
PROTECTIVE CLOTHING
2
