12
ACCESSORIES
The following accessories are available for use with the
SA15.
Constant Flow Valve (CFV)
The CFV attachment provides constant pressure regulation by limiting the output
pressure if pumping is excessive and shutting off the liquid flow if pressure is too low.
This ensures a constant flow of spray solution and a predictable spray pattern and
droplet spectrum. This helps prevent under and over doing and prevents the
production of over small droplets which lead to off-target spray drift.
If the CFV is correctly installed (
see 'Fitting The CFV’)
pumping will be easier as
fewer strokes will be needed to maintain pressure. Pump only two or three strokes
before opening the trigger valve to commence spraying. One or two pump strokes
every few steps will automatically maintain a constant flow at the correct pressure.
GRP Lance
GRP Lance of 50 cm length
is provided as the standard spray lance.
Spray shield (Optional accessories)
For use with the flat fan nozzle the spray shield helps minimize spray drift.
70 Mesh Filter 8407M (Optional accessories)
For use with the Strainer 135mm (8407L). Finer filtration 70 mesh to filter out fine
dirt.
