5
Specifications
Model
Speaker Type:
Frequency Response:
Sensitivity
Recommended Power:
Woofer:
Tweeter:
Crossover Frequency:
Crossover Slope:
Impedance:
Finish/Color:
Grille Color:
Dimensions:
Weight:
MM-4x
Bookshelf
100Hz-20kHz ±3dB
85db
(2.38V @ 1M)
20-100 Watts
(1) 4” (102mm) Aluminum Cone
(1) 1” (25mm) Silk Dome
3,000 Hz
12dB/Octave
8 Ohms
Black or White Satin
Black or White Fabric
Width: 5-1/4” (133mm)
Height: 7-1/2” (191mm)
Depth: 4-3/4” (121mm)
3.1 lbs. (1.41 Kg)
C-4x
Center/LCR (Left, Center or Right)
100Hz-20kHz ±3dB
88db
(2.38V @ 1M)
10-100 Watts
(2) 4” (102mm) Aluminum Cone
(1) 1” (25mm) Silk Dome
3,000 Hz
12dB/Octave
6 Ohms
Black or White Satin
Black or White Fabric
Width: 14” (356mm)
Height: 5” (127mm)
Depth: 4-1/2” (114mm)
6.5 lbs. (2.95 Kg)
No sound from
speakers
No sound from
one speaker
Very little bass
and/or imaging
Speaker wire not connected
Speaker selector on amplifier is
not on
Balance control on receiver
or pre-amp is not centered
Speaker wire not securely
connected
Speakers are wired out of phase
Make sure wire is connected
at both the speaker and the
amplifier observing proper
polarity
Activate proper selector on
amplifier
Place balance control in the
center
Check all connections at
amplifier and speakers
Check entire system for proper
polarity and make adjustments
as necessary
Troubleshooting
Probable Cause:
Solution:
Situation:
