background image

Break-in Period

Allow several hours of listening time to adequately break-in your Impression Series 
subwoofer. As your subwoofer breaks-in during the first few hours of listening, the driver 
suspension will loosen. Following this initial break-in period, there will be an increase in 
low-frequency response, improved definition, and increased clarity and detail. 

Introduction

Impression Series Subwoofer 

Owner’s Manual

Impression Series Subwoofers

Congratulations on your purchase of an Impression Series I-12 or I-12/e powered 
subwoofer! Your subwoofer is the result of many years of research and development 
dedicated to producing high quality products for home audio and home theater systems. 
This owners manual contains features, setup recommendations and specifications for the 
Impression Series I-12 and I-12/e powered subwoofers. It is recommended you thoroughly 
read through the material contained in this manual before connecting your subwoofer. 
Doing this will ensure you have a good understanding of how to setup your subwoofer 
for optimum performance and allow it to provide you years of listening enjoyment. 

I-12 subwoofer with grille.

I-12/e subwoofer without grille.

To maintain your subwoofer’s appearance, we recommend carefully wiping it with a clean, 
dampened soft cloth. To help clean dust from the grille cloth, we recommend using a 
vacuum with a brush attachment. 

Care and Cleaning

Summary of Contents for I-12















Reviews: