6
MORE PAD INDOOR
AD INDOOR is a mat that self-modulates electrical consumption and self-adjusts
maximum surface temperature;
Absorption and surface temperature depend on the ability of the environment to absorb
the energy released by the mat.
The lower the starting temperature, the higher the initial absorption (see chapter 7) and
the lower the surface temperature reached. During room temperature optimisation, the
absorption will decrease and the surface temperature will rise to about 30°C, with the
room temperature at about 20°C. If the room temperature tends to rise, the mat’s self-
modulating capacity will further reduce consumption as it has reached its natural self-
regulating limit of approximately 30°C.
Self-modulation depends on the semiconductor material and is limited to maximum
50% of initial consumption; therefore, if the area of action of the mat is covered with an
obstruction that almost completely prevents heat exchange, the surface temperature
may reach 54°C.
An obstruction that could prevent the almost complete heat exchange of the PAD
INDOOR mat is a condition that is difficult to recreate in reality. The building structures on
which the mat is placed always allow for the dispersion of the energy not released to the
environment. In any case, it is advisable, when laying on the floor, that the flat parts of the
furniture are always fitted with feet to facilitate heat transfer to the room.
Danger
Warning
Danger
Warning
