RBR#0008818revA
–
18
Most experienced users of oceanographic equipment replace all O-rings before every deployment as a matter of
routine. The cost of an O-ring is negligible compared with the cost of the instrument and its deployment. Therefore,
routine replacement of O-rings is cheap insurance.
O-rings: #2-225 N70 O-ring (RBR#0002408), #8-225 N90 backup ring (RBR#0009115)
6.6.4 Corrective maintenance
Overview:
The
Paroscientific Digiquartz® sensor is filled with a buffer, which is connected to the environment via a tube. The
mounting of the Paroscientific Digiquartz® sensor and the connection to the sensor end cap are described in
. Should any of the buffer leak from the instrument this will need to be refilled, likewise if the
buffer tube were to have debris fall into it the material would need to be purged. The instructions in this section
describe how to remove the anti-biofouling assembly to allow access to the buffer tube for the oil to be refilled or for
debris to be flushed out.
RBRquartz Maintenance kit (0008879)
Item No.
Description
1
Lint-free swabs
Summary of Contents for quartz3 Q
