FenixN – user’s manual
Document Revision: 1.5.B50
January 2022
Back on
Task edit
sub-page, following information and setting can be viewed:
Task time –
When flying AAT task, time of task can be set here.
Type –
describes which type of task is detected.
T: –
or also known as take-off point which does not have to be set, and it’s not taken
into account for navigation. Take-off point can be set from the list of
turn-points
or
airports
.
S:
–
or
also known as start point of your task, can be set from
turn-points
,
airports
or
zones
. Short press with bottom rotary knob will let you enter a sub-page, from where
you can select start-point. Selecting option
Goto
will display direction to currently set
start point in red line.
1, 2, 3, n –
are list of navigation points in your task. Short press on any of these points
will display edit menu sub-page. Following options for editing navigation points are
available:
o
Goto –
will display direction and set currently selected point as navigation point.
o
Select TP –
gives option to change current selected point from turn-point list.
o
Select APT -
gives option to change current selected point from airports list.
o
Insert TP –
will add point from selection in turn-points list. Added point will be
inserted above currently selected point.
o
Insert APT –
will add point from selection in airports list. Added point will be
inserted above currently selected point.
o
Zone –
can set or edit specification, shape, and type of currently selected point.
o
Delete –
will fully erase currently selected point.
F: –
or finish line settings. Same optional settings apply as for navigation points with the
difference of two additional settings:
o
Finish < 1000m –
is optional setting that can be selected.
o
Finish altitude –
determine altitude of finish line.
33
