W i t h a defect or a malfunctioning first the cause of the disturbance is to be eliminated, before you start your
Model again.
Do not expose your Model and the remote control plant over longer time to the direct sun exposure or
la r g e
heat.
W i t h a heavy crash (for example f r o m
la r g e
height) the electronic Gyro sensors can be damaged and/or detuned.
Before a renewed flight fr om there absolutely the vole function is to be examined!
W i t h a crash t h e g a s is to be reduced immediately t o nul. Turning rotors can b e d a m a g e d with contact with
obstacles and/or with the impact. Before a renewed flight these are to be examined absolu tely for eventuele tears
or Bruchstelen!
In order to avoid damage to the Quadrocopter by crash because of undervoltage and/or to the accumulator by
over-discharging, we recommend, to absolutely consider in the flight the flare signals for undervoltage. Since
the inserted LEDs radiate only in a direction, we recommend the additional installation of the LiPo LiPo -Saver
stock No. 230327. The Lipo Lipo -Saver indicates by light signal a threatening undervoltage to you. Place the LiPo
LiPo-Saver at
su it a b le
Stele in the Quadrocopter.
Due to the natural heating up of the engines and the electronics construction units we recommend not to exceed a
flying time of max. 20 min. Afterwards yo u should l e a v e the Model sufficiently to cooling, in order to avoid
eventuele damage by overheating!
4 .
A f t e r t h e e n t e r p r i s e
Clean the Quadrocopter of contamination (grass etc.) and examine you the rotors for tightness as well as a n y
damages through crashes.
Always separate the accumulator from electronics by marking the plug out. E v e n t u e l flowing rivers can destroy
otherwise the accumulator over -discharged and in such a way!
