TC3 “O” V2
RC Product Designs
Page 10
Extension. To acquire proper clearance
between the shock and the tower
extension, you may need to shim the
plastic shock mount with washers. The
shocks must be mounted facing forward of
the shock tower. The lower shock mount
location should be the center hole in the
front A-Arm.
Ø
The front body mount will need to be
installed in the center hole of the chassis
brace. You will need to secure it with one
4-40 x ½” flat head screw as shown in pic
13.
Ø
Mount the Delrin Wheel Hex Adapters part
number DC-011B to the stock axles. Make
sure you have the pins inserted in the axle
prior to installation. The hex adapters
have been specifically designed to accept
the Schumacher Buggy Wheels.
Picture 10: Front End Assembly Rear View
Picture 11: Front End Assembly Top View
Picture 8: Front Shock Tower installed.
Picture 9: Front Tower Installed Rear View
Ø
Install the front chassis brace DC-004B
with the supplied 0.10” spacers
underneath and the 4 4-40 x ½” socket
head screws as shown in
Picture 14
.
Picture 13: Carbon Fiber Chassis Brace
Front Body Mount
