background image

Trim with Hobby Knife

Cut with Scissors

Glue

Repeat or Build Multiple

Attention

Paint

Body Reamer

Build Right and Left

Build Front and Rear

Instruction Manual Symbols Key

Tips for Assembly

Drill Hole

Double Sided 

Adhesive Tape

Use good quality hex drivers to avoid stripping screw heads.
Open kit bags in order of assembly steps.
Use “Step” index for quantity and size of hardware to be used for assembly step.
Drilling holes with specified drill size is preferred, but a body reamer can be used in its place.
Do not overtighten screws.

 

The following is a preview of the instructions and the order in which they should be 

followed:

    First, trim your body and drill all of the mounting holes. Making sure to test fit all of the   

    parts. Do NOT glue anything to the body before painting. 

 

    Second, clean and paint the lexan body. 
    Third, apply the supplied stickers to fit your own personal style. 
    Fourth, mount all of the supplied accessories using the provided instructions.  

Warranty

RC4WD non-electrical products are warranted to be free of defects in materials and workman-

ship when new. Our limited warranty does not cover damages due to normal wear and tear, 

user error of assembly or installation, user modifications, user's failure to perform routine 

maintenance, addition of aftermarket parts or option parts. This warranty lasts 30 days after 

arrival for original purchaser. In the event of a defect under this warranty, RC4WD will, at our 

discretion, replace the product, provided our inspection  indicates  that  an  original  defect 

exists.  RC4WD  reserves  the  right  to replace any product which is no longer available with a 

product of comparable value and function. If RC4WD determines the repair is not covered 

under warranty guidelines, we will contact you to discuss your options. If you have any 

questions, please contact us via email at support@rc4wd.com.

RC4WD warranties its electronics for 30 days from date of arrival. This covers all electrical 

items except items that are already noted on the individual product page.   

3

RC4WD 100-0031

Summary of Contents for Z-B0169




















Reviews: