RCA 14B042, User Manual

12

Using the Menu System

Note: When you enter the P.LOCK submenu for the fi rst time, NEW 
CODE appears in red on the menu. Enter a four-digit number as 
your password by pressing the 0-9 buttons. After you enter the 
number, ENTER CODE appears in blue. Reconfi rm your password by 
entering it again.

1.    If you have already set your password and you want to enter the 

P.LOCK menu, 

ENTER CODE

 appears in blue, as shown in Figure 1. 

Enter your password. 

Changing Your Password

1.    If you need to change your password, press the CODE button 

when 

ENTER CODE

 is displayed. 

OLD CODE

 appears. Enter your 

old password, then NEW CODE appears in red.  Enter a four-digit 
number as your new password. After you enter the number, 

ENTER 

CODE

 appears in blue. Reconfi rm your password by entering it 

again.

If you forget your password, enter 4769 as your password and change it 
to a new one.

CH Lock (Channel Lock)

You can lock individual channels with this feature.

LOCK 

ON:

 Turns on CH LOCK.

OFF:

 Turns off CH LOCK.

CH AIR:

 Select the channel you want to lock. You can use VOL  /  

buttons or number buttons to input channel number.

Note: “CH CABLE ***” is displayed under CABLE mode.

CH LOCK 

ON:

 If this is set to 

ON, 

the selected channel in the 

CH LOCK

 menu 

cannot be viewed.

OFF:

 LOCK is deactivated and any selected channel for 

CH LOCK

 can 

be viewed.

PICTURE

P. LOCK

TIMER

PRESET

EXTRA

ENTER CODE

        - - - -

Using the P.LOCK (Parental Lock) 
menu

Display 

 Highlight 

P.LOCK

 Select

PICTURE

P. LOCK

TIMER

PRESET

EXTRA

CH LOCK

V-CHIP

PICTURE

P. LOCK

TIMER

PRESET

EXTRA

LOCK ON

CH AIR 

69

CH LOCK 

ON

Figure 1

Figure 2

To select the P.LOCK menu