Chapter 1
5
Graphics contained within this publication are for representation only.
Connections & Setup
R
L/MONO
AUDIO
VIDEO S-VIDEO IN
VIDEO 1
Pr
Pb
Y
R AUDIO
VIDEO
L/MONO
VIDEO 2
Pr
Pb
Y
R
L
VIDEO 3
Explanation of Jacks
This section describes the jacks you can use to make connections. There are several
ways to connect components to your TV.
TV ANT
Lets you connect a coaxial cable to receive the signal from the antenna,
cable, cable box, or if using the example on page 4, a VCR.
VIDEO 1
VIDEO, AUDIO R and L/MONO INPUTS
Lets you connect a
component such as a VCR, DVD player, or laserdisc player.
•
R (RIGHT) AUDIO
Provides right audio connection. The
right audio connector is usually red.
•
L/MONO AUDIO
Provides left audio connection. The
left audio connector is usually white.
•
VIDEO
Provides composite video connection. The video
connector is usually yellow.
•
S-VIDEO
Provides better picture quality than the video
jacks because the color part of the signal is separated
from the black and white part of the picture. When using
S-VIDEO IN, make sure to connect left and right audio
cables to the L/MONO and R AUDIO Input jacks.
VIDEO 2
VIDEO, AUDIO R and L/MONO and Y, Pb, Pr
INPUTS
Lets
you connect a component video source, such as a DVD player.
•
Y, Pb, Pr
Provides optimum picture quality because the
video is separated into three signals. Use three video-
grade cables for the connection. When using VIDEO 2
Y, Pb, Pr
, make sure to connect left and right audio cables
to the VIDEO 2 AUDIO Input jacks.
•
R and L/MONO AUDIO and VIDEO
Their description is
the same as VIDEO 1.
VIDEO 3
R and L AUDIO and Y, Pb, Pr
INPUTS
Lets you connect a
second component video source, such as a DVD player. Their
description is the same as VIDEO 2 above. When using
VIDEO 3 Y, Pb, Pr, make sure you connect the left and right
audio cables to the VIDEO 3 Audio jacks.
AUDIO/VIDEO OUTPUTS
Lets you connect an amplifier or
audio receiver for improved sound quality or an external
video monitor, for models with Video Out.
R
L
OUT
VIDEO
