background image

27

Parental Lock Blocking Options

After setting your password Parental Lock also offers these
special blocking options.

1

Press MENU to see the main menu.

2

Press CH+ or CH- to highlight Preferences.

3

Press OK to enter the Preferences submenu.

4

Press CH+ or CH- repeatedly to highlight Par.
(Parental) Control.

5

Press OK to display the password screen.

6

Press the Number buttons to enter your four-digit
code. The Parental Lock setup menu appears on the
screen.

7

Press CH+ or CH- to select Master Enable, Block
Unrated
or Block No Rating.

MASTER ENABLE:

 this is the “master switch” for

Parental Lock. When ON, all blocking/censoring you
have set is enabled. When OFF, all blocking is disabled.

BLOCK UNRATED:

 All unrated programs (based on

Movie Ratings or TV Ratings) will be blocked if this
feature is ON and MASTER ENABLE is ON.

BLOCK NO RATING:

 All programming with no

content advisory data will be blocked if this feature is
ON and MASTER ENABLE is ON.

8

Press VOL+ or VOL- to turn the blocking option On or
Off.

9

Press MENU repeatedly to exit the menu or the menu
will automatically disappear within a few seconds if
no buttons are pressed on the remote control.

Model 20V500T: If you have this model you will not
see the Sound menu option and your remote will not
have MTS or SOUND buttons.

TV parental guidelines

Block unrated         off
Block No Rating      off

MPAA rating

Master Enable         off

Setup                        

Main Menu         

Picture                 

Time                 

Preferences                          

FPA Lock

English

Off

Preferences

Language

CC

Off

Par. Control                                    

Preferences                          

Setup                        

Ti me                 

Main Menu         

Picture                 
Sound

Sound

E n t e r  P a s s w o r d

 

Summary of Contents for 20V500T









































Reviews: