20
8. Press the
Sel/Save
button to start recording. Speak within 6 inches away from the Mic
located under
Speaker
button.
9. Press
Sel/Save
again to stop recording.
10. The OGA is played automatically for your verification. It will then return to the
OGA
REC
menu to start over or to record another OGA.
Ring Delay
This feature allows you to set number of rings before the unit answers the incoming call.
1. Press the
Menu
button.
2. Use the
5
or
6
to scroll to
ANSWERING SYS
.
3. Press the
Sel/Save
button.
4. Use the
5
or
6
to scroll to
RING DELAY
.
5. Press the
Sel/Save
button.
6. Use the
|
or
}
to scroll to L1 or L2.
7. Then use
5
or
6
to scroll to the desired ring delay - 2, 3, 4, 5, 6 rings, TOLL SAVER.
For TOLL SAVER selection, the unit will answer on the 3rd ring if new voice messages
have been recorded or on the 5th ring if there are no new voice messages.
8. Press the
Sel/Save
button to save. To start over, press the
Exit
button to return to the
ANSWERING SYS
menu.
Message Length
This is to limit the length of the incoming caller’s message.
1. Press the
Menu
button.
2. Use the
5
or
6
to scroll to
ANSWERING SYS
.
3. Press the
Sel/Save
button.
4. Use the
5
or
6
to scroll to
MESSAGE LENGTH
.
5. Press the
Sel/Save
button.
6. Use the
|
or
}
to scroll to L1 or L2.
7. Then use
5
or
6
to scroll desired option -
1 MINUTE, 2 MINUTES or NO LIMIT
.
8. Press the
Sel/Save
button to save. To start over, press the
Exit
button to return to the
ANSWERING SYS
menu.
Connections and Setup