17
Register
From the Phone Setting Menu:
1. Press the
VOL
(- or +) button to scroll to
Register
.
2. Press SELECT soft key.
Register HS Registering...
shows in the display.
3. Press and hold the
Page
button on base for
about 3 seconds
4.
“
Registering
”
displays to indicate the base is now in registration mode.
5. If the registration is successful, the handset shows “
Registration
complete”
for 2 seconds and emits a confirmation tone.
6. If the registration is failed (i.e. timeout), the handset shows
“REGISTRATION FAILED!”
for 2 seconds and emits an error tone.
Remove Handset
De-registration cancels registration. During the de-registration process,
keep the handset near the base.
WARNING: It is not recommended that a handset be
deregistered unless absolutely necessary because once a
handset is deregistered, that handset’s telephone features
cannot be used until the handset is re-registered.
From the Phone Setting Menu:
1. Press the
VOL
(- or +) button to scroll to the
Remove handset
.
2. Press SELECT soft key. “
Remove handset?”
shows on the display.
3. Press the YES soft key to confirm de-registration.
then shows
“Press “REG” to initiate registration”
in the handset.
NOTE: You can press the REG soft key to enter the registation mode again.
De-Register (Only applicable for base)
From the Phone Setting Menu:
1. Press the
VOL
(- or +) button to scroll to the
Deregistration
.
2. Press SELECT soft key. The list of all registered handsets will be shown,
and use the
VOL
(- or +) button to scroll to your selection.
3. Press the SELECT soft key. “
Remove handset?”
shows on the display.
Press YES soft key to confirm de-registration.
base emit a confirm tone
then shows
“Press “REG”
to initiate registration” in the handset.
Programming the Telephone
Add Headset (only applicable for base)
NOTE
: This wireless headset option is only compatible with the RCA
25065RE1, 25265RE2 and 25270RE3 headsets.
From the Phone Setting Menu:
1. Press the vol(- or +) button to scroll to Add Headset;
2. Press the SELECT Sofykey. The screen will display Pairing...Please wait.
3. On the headset, press and hold the Talk On/Off button together with the
button for 3 seconds. The LED indicators will begin blinking in
an alternate red and blue pattern.
4. If the registration is successful, a blue LED on the Headset will flash.
NOTE
: Only one cordless Headset may pair with a base unit.
Summary of Contents for 25252
