LEFT/RIGHT DOOR OPENING METHOD
This product allows you to reverse the door
opening from left to right and back. You can select
your preference of door opening by following the
procedure to make the change.
TOOLS REQUIRED
Phillips and Flat Head Screwdrivers, Ratchet
Wrench with 8 mm and 10 mm sockets.
DISMANTLING
(Fig. 1 and Fig. 2)
1. Affix refrigerator and freezer door by sticking
adhesive tape on both sides to hold doors in
place.
2. As shown in Fig. 1, remove the upper hinge
cover by using flat head screwdriver. Then
remove three screws using ratchet wrench
with 10 mm head. Take out hinge by pulling it
vertically and keep it in safe place.
3. Remove the adhesive tape on freezer door, lift it
and take off the door and carefully put it aside.
4. Remove two screws of central hinge using
ratchet wrench with 8 mm socket, and keep
them in a safe place (Fig. 2)
5. Remove the adhesive tape on refrigerator door,
lift it and take refrigerator door, and carefully
put it aside.
6. Remove the doorstoppers from the refrigerator
and freezer doors. (Fig. 3)
7. Insert left side doorstoppers (provided in your
packing) on the left side bottom hole of the
refrigerator door and on the left side bottom
hole of the freezer door. Fasten with screws
provided. (Fig. 4)
REVERSING THE DOOR SWING
7
Fig. 1
Fig. 2
Fig. 3
Fig. 4
