5
English
To connect the ANT1550 without the
amplifier to a converter box:
1. Make sure your TV is turned off.
2. Connect the ANT1550’s built-in coaxial
cable to the antenna input on your
converter box.
3. Connect the converter box to your TV
using either audio/video cables or a
coaxial cable:
a.
Audio/Video cable connection:
Connect the video (yellow) and stereo
audio (red and white) cables to the
video and audio outputs on your
converter box. Connect the other ends
to the video and audio inputs on your
TV. Make sure you match the colors
of the jacks on each—yellow plug to
yellow jack, red plug to red jack, and
white plug to white jack.
b.
Coaxial cable connection:
Connect a
coaxial cable to the antenna output on
your converter box. Connect the other
end of the coaxial cable to the antenna
input on your TV.
4. Re-scan for channels on your converter
box.
Notes: See your converter box’s owner’s
manual for more detailed connection
instructions. For additional information
about setting up your converter box, visit
www.keepmytv.com
Converter Box
Coaxial
Cable
Audio/Video
Cables
ANT1550
Built-In
Coaxial Cable
TV
–or–
3a
2
3b
4
