4
C. Connect the VHF dipoles to the UHF/VHF
combo box.
A. Mount the mounting base.
Assemble the antenna (continued).
2
Pieces Used:
UHF Element
+ B
Combo Box
(4) VHF
elements
Take one of the two longer VHF elements
and insert its hollow end into the top hole
on one side of the combo panel until it
contacts the screw threads inside this
hole. Then screw this element tightly into
place.
Take one of the two shorter VHF elements
and insert its hollow end into the bottom
hole on one side of the combo panel until
it contacts the screw threads inside this
hole. Then screw this element tightly into
place.
Repeat with the remaining VHF elements
on the other side of the combo panel.
Combo panel, front
Combo
panel, side
Long VHF
element
Mount the antenna.
3
Pieces Used:
(1) Mounting
base
(4) 1/4”x60
mounting
screws
WARNING: Never hang anything from this antenna; never attach foreign
objects to this antenna.
NOTE: In most cases, this antenna provides the best performance when
mounted outdoors in a high location (such as on the roof or high up on the
side of your house). This antenna can also be mounted in an attic.
Find the four mounting screws included in this
package. Using these screws, attach the base to
the surface as shown here.
Summary of Contents for ANT950E
Page 8: ...E n g l i s h v e r s i o n o n b a ...
Page 9: ......
