background image

10

POWER

CHARGE

BATTERY

Powering the Camcorder

1. Connect one end of the adapter/

charger’s cable to the adapter/
charger’s DC OUTPUT jack and the
other end to the DC IN 9.6V jack on
the back of the camcorder.

2. Plug the adapter/charger into the

nearest AC outlet (120V, 50/60 Hz).

3. The POWER indicator on the

adapter/charger will light when it is
properly connected.

Notes:  The adapter/charger cannot charge
the battery and operate the camcorder at the
same time.  If you connect both, the
adapter/charger will power the camcorder.
Remove the adapter/charger’s cable from
the DC OUTPUT jack to charge the
battery.

When using the adapter/charger to power
the camcorder, the battery level indicator
may display

.  This indicator is used

for battery operation and has no meaning
when using the adapter/charger to power
the camcorder.

To Remove the Adapter/Charger 

1. Remove the adapter/charger’s plug

from the AC outlet.

2. Remove the adapter/charger’s DC

cable from the DC IN 9.6V jack on the
camcorder.

Caution:  Do not attempt to use a “power converter” to use your AC adapter/charger
on a power source other than 120 volts, 50/60 Hz, or the adapter/charger and
camcorder may be damaged.  If you wish to operate the AC adapter/charger on a
power source other than 120 volts, 50/60 Hz, use only a transformer-type power
converter.  Do not use “solid-state” or “switching-type” power converters.  They
will damage your AC adapter/charger.   
An optional CPS014 shown on page 53 is
designed for use on 100-240 volts, 50/60 Hz.

Using the Adapter/Charger to Power Your Camcorder

Adapter/Charger

POWER
Indicator

Adapter/Charger’s
DC Cable

DC
OUTPUT
Jack

Plug in AC Outlet
(120V, 50/60Hz)

DC IN 9.6V Jack

Caution:

Do not use this adapter/charger

for any purpose other than charging the
EP096FS, EP096FL, CB096FS, or CB096FL
battery pack or supplying power to the
camcorder.

Summary of Contents for CC421









































































Reviews: