Included Accessories
13
Replace Light Bulb
Cautions:
Do not touch the light bulb with your fingers. If you accidentally
touch the bulb, wipe it with a soft cloth. A dirty bulb might cause
smoke and have a reduced service life.
When replacing the bulb, only use #221111 to reduce the risk of
fire and other hazards.
Light Cover
Reflection
Plate
Lower Hook
Bulb
1. Press and hold the lower hook of the
light cover while removing the light
cover from the light case.
2. Replace the light bulb.
Note: See the installation instructions
packed with the replacement bulb for
detailed instructions.
3. To replace the light cover, pass the
bulb through the hole of the
Light Case
reflection plate and attach the lower
hook to the light case on the camcorder.
4. Press gently on the front of the light
cover until it locks into place.
Note: Make sure the front cover of the
light is properly attached.
Remove and Replace the Light Bulb
