Playback Ope
5. Press
on the camcorder. Adjust
1. Set the
selector switch on the
tracking on the camcorder, if
RF output
ter
or
CH4.
necessary.
Details are on page 51.
2. Turn on the T
it to the same
l
During playback, use the playback
channel (3 or 4
selected with the
features
described on page
channel select
on the RF
6.
Press
STOP/EJECT
on the camcorder
output adapter.1
when you are finished playing back the
3. Press and hold the
button on the
tape.
camcorder‘s
P W&R
while
sliding it to
V
Watch What
is Seeing or Recording on the TV
tune it to channel
3 or 4 (the sam
you selected
with the
1 selector switch on the
RF output adap er).
3. Press the camcorder’s
RECIPAUSE
button to begin recording. You can
watch what the camcorder is seeing
or recording on the TV screen.
Note: When the camcorder is used as a
camera, turn the TV’s volume down to
prevent a high-pitched squeal caused by
feedback.
Note
to
Cable-h
er:
This reminder is provided to call your attention to Article
820-40 of the
Electrical Code (Section 54 of Canadian Electrical Code,
Part I), that
guidelines for proper grounding and, in particular, specifies that the
cable ground
grounding system of the building as close to the
point of cable
5 5
Summary of Contents for CC543
Page 2: ......
