Digital Still Camera
Chapter 5
65
Slide Show
You can automatically look at all the snapshots stored
in memory in numerical order.
1.
Set the Power switch to
. (The VIDEO or
DSC indicator comes on.)
2.
If the DSC indicator is not on, press REFRESH for
approximately 1 second. (The DSC indicator
comes on and a snapshot stored in memory is
displayed.)
3.
Press in the MENU dial. (The DSC menu appears.)
4.
Rotate the MENU dial to highlight
SLIDE SHOW
.
Press in the MENU dial to select it. (The slide
show starts.)
Note:
To stop the slide show, press in the
MENU dial twice.
Index
With the Index feature, you can view your snapshots
in groups of 6. This also allows you to see which
picture mode was selected for each picture and which
ones are protected against accidental erasure.
01: Index number
The first snapshot taken is index #01. Let’s say, for
example, that a total of 10 images are stored (index
number: 01 to 10) in memory. If three images
(numbers 02, 04, and 06) are deleted from memory,
the remaining images are automatically moved up to
fill any gaps in the numerical sequence. Therefore, the
number of remaining images is 7, and the new index
numbers range from 01 to 07.
: Picture mode
This icon tells you what the picture mode is of the
snapshot. There are 2 modes available:
FINE
and
STANDARD
(
see page 59
). A star is displayed next to
snapshots shot in the FINE mode. There are no marks
next to snapshots shot in the
STANDARD
mode.
