5
Record
cleaning
sprays
Thinner
Benzene
Notes:
It may not be possible to play unfinalized discs
which have very little recording time left on them.
Finalizing a CD-R or CD-RW disc means making a recorded
disc playable on an ordinary CD changer. To play CD-RWs,
the changer must be specifically compatible with CD-RW
discs.
Your changer can play discs which display these
marks.
'
• When holding discs, do not touch their signal surfaces.
Hold by the edges, or by one edge and the center hole.
• Do not affix gummed labels or tape to the label surfaces.
Do not scratch or damage the label.
• Discs rotate at high speed inside the changer. Do not use
damaged, cracked, or warped discs.
• Do not play a CD with other than a circular shape as
malfunction might occur.
• Do not use CD accessories such as stabilizer protection
sheets, or protection rings as they might cause
malfunction.
CD LENS CLEANER
The changer’s pickup lens should not become dirty in
normal use. RadioShack offers cleaning kits for CD lens.
CLEANING AND HANDLING COMPACT DISCS
• Fingerprints or smudges on a CD’s surface might not
directly affect the recorded signals, but might cause
degradation of sound quality. Keep your discs clean by
wiping them gently with a soft cloth from the inner edge
toward the outer periphery. RadioShack offers a variety
of cleaning kits for CDs.
• If a disc becomes very dirty, wipe the dirt away gently
with a soft cloth moistened in water, removing any water
drops with another soft, dry cloth.
• Do not use record cleaning sprays or anti-static agents on
discs. Do not clean discs with benzene, thinner, or other
volatile solvents, which might damage the disc.
When transporting your changer, remove all discs from the
rack. Turn off
POWER
, wait for
OFF
to disappear from the
display, then unplug the power cord.
