B. Connecting your player to a wireless access point or router
C. Connection Status
To check your network connection status, select the Setup menu from Home Menu, then select Setup ->
Wi-Fi or Ethernet. You can check the status of Wi-Fi or Ethernet.
Note:
Do not place anything on the top of your unit. Placing objects on the top of your unit may interfere with
the wireless signal, or cause the unit to overheat.
Your player has an integrated Wi-Fi device
and antenna. No physical connection
to the wireless router is necessary. Place
your player within range of your wireless
network. During configuration of your
player for network access, you may need
to enter a password if your network has
security turned on.
4
Connnection to other devices
A. USB device
Insert the uSB device into uSB port, after system automatically detected uSB device, then it can work.
Go to Media menu and click Music, Video or Photo app to play.
B. SD card device
Insert the SD card into SD card slot, after system automatically detected SD device, then it can work.
Go to Media menu and click Music, Video or Photo app to play.
Modem Cable
Modem Port
Wireless access point
Unit
EN - 4
5
Powering up & Initial setup
Operating with the wireless mouse
Before operation of this unit, please
operate the wireless mouse first.
1. Remove the wireless mouse’s
uSB receiver from the battery
compartment.
2. Insert uSB receiver into uSB1 or 2.
3. Switch “ON” the mouse.
RCA Streaming Media Box
After connection of this unit
1. When plug in the power to the unit, it will turn ON automatically. GREEN indicator lights up when on.
Notes:
• Short press the button the unit to turn it on Standby Mode, then the RED indicator lights up.
• Press and hold the button to shut down the unit.
2. There is a POWER icon added in the Home menu, you can use the mouse to click the POWER icon to
shut down the unit.
3. You can press the button on the unit to turn it ON.
USB receiver
