EN
Recharging the battery pack
Using the Battery
Recharging the battery pack as described below.
1
2
1
2
Connect the DC output plug of AC adapter to the battery pack.
Connect the AC adapter to the power outlet.
1
2
When recharging starts, the recharge LED lights in red.
The recharge LED lights in green when recharging completes. Remove the power
cord from battery pack.
Recharging usually completes in about 4~5 hours.
The battery pack can be used for about 300 cycles of recharging and operations, though this is
variable depending on the operating conditions.
Charge the battery pack fully before using it for the first time.
Place the battery pack and AC adapter on a flat surface for recharging.
Do not short-circuit the terminals of the battery pack and AC adapter.
CAUTION
The battery charger(AC adapter) is compatible with supply voltage between
100 and 240 V AC and can be used universally.
When you want to use it on an overseas travel, however, be sure to prepare
a power plug adapter matching the local power outlet.
Notes:
20
-EN
Before Using
Graphics are for representation only. Your unit may differ slightly.