Playback Functions
Loading
1
2
,
3
Press OPEN button to open.
1
A click is heard.
Set the disc securely. Failure to set it
securely could result in damage.
Do not use cracked or warped discs.
Doing so could result in damage.
Place single-sided DVDs or CDs in
with the label (printed) side facing
upwards.
For double-sided DVDs, check each
side carefully, then place the disc in
securely (until a click is heard).
For CDs or one-sided DVDs, you do
not have to worry about touching the
label (printed) side of the disc with
your fingers. Since two-sided DVDs,
however, have signals recorded on
both sides, so be careful not to
scratch them when removing them
from the player.
Notes:
The player starts loading.
Push the tray into the player.
4
2
3
If no power supply, the tray
will not open, you must
insert the open-stick into
the hole to open it.
Place in disc and press down
the disc with your fingers
near the center hole.
(If no disk is placed in, the tray will
open automatically after power on.)
24
-EN
EN
EN
Graphics are for representation only. Your unit may differ slightly.
Basic Operations
