Volume is different for DVDs and CDs
This is due to the different recording
methods.
This player incorporates copyright protection technology. Some discs include signals protected against
copied by a VCR. Such recorded discs can not be played properly.
.
Player cannot be operated with the remote control unit
Remote control unit is too far fromthe main unit or have too large angle with the remote sensor.
Remote control unit s battery is worn out.
For some discs, 96 kHz digital output of linear PCM audio signals is
prohibited.
Disc is dirty .
Pause or slow play mode is set.
Main unit s volume is set to minimum.
Earphone is plugged in.
Picture is disturbed when playing a DVD recorded by a VCR.
TV or other device operates erroneously
Notes:
The player may stop operation properly due to static electricity or other external influences.
In this case, usually solve the problem by unplugging the power cord and then
plugging it in again. If still can not solve it, consult with the nearest service center.
Liquid crystal display
A few picture elements may be black or a particular color displayed on the LCD screen.
This is normal.
No sound is produced from speakers or sound is distorted
,
The player s remote control unit may cause some TVs with wireless remote control to
operate erroneously.
,
No sound is produced or sound is distorted when connected to a TV ,
a amplifier, etc.
This is normal.
Player gets hot
Connection cables are not firmly plugged in or not contacted well.
Connection plugs or jacks are dirty
.
Audio cables
arenotProperly
connected.
Audio digital output is connected to a non-compatible AV amplifier,etc.
Have wrong DTS setting.
The player is set to AV OUT but there are other AV signals inputted from AV jack.
Bad playback quality
32
-EN
Troubleshooting Tips
EN
EN
Graphics are for representation only. Your unit may differ slightly.
Additional Information