EN - 15
Clear:
Delete all the input programs.
Exit:
Exit memory menu and return to
normal playback.
Start:
Start memory playback.
Next / Prev: Move to the next / previous setup
page.
Programmable Memory
You can combine your favorite titles/chapters and play them in the order you determine.
1. Press the MEMORY button while a DVD is playing. The following display appears.
2. Press ENTER button and use the / buttons on the remote control to select desired
title and chapter number. Press ENTER button again it will move to the next item
automatically.
• You can use the Cursor buttons (
, , , ) to move the highlighted bar to any item,
and re-enter the title and chapter. (Press the
NEXT /
PREV to move to the next /
previous setup page.)
• You can use the Cursor buttons (
, , , ) to move the highlighted bar to “Clear”,
“Exit”, “Start” or “Next / Prev”, and press the ENTER button to confirm.
3. Press the
PLAY button to start memory playback. (“
” appears on the
screen.)
4. To resume normal playback from memory playback
• Press the MEMORY button to display the memory menu.
• Use the Cursor buttons (
, , , ) to move the highlighted bar to “Stop”. Press the
ENTER button to confirm “Stop”.
• Use the Cursor buttons (
, , , ) to highlight “Clear”, and then press the ENTER
button to confirm.
• Use the Cursor buttons (
, , , ) to highlight “Exit”, and then press the ENTER
button to confirm. It will return to normal playback (“
” disappear from the
screen.)
Note:
• If the title or chapter number entered is not permitted by the DVD, it will disappear.
You should re-enter correct number.
• You should input items one by one following the 1, 2, 3 ... sequence.
• If the DVD contains only one title, you can only arrange order for chapters.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player repeats the current
memory playback.
• The programmed selections will be cleared when you press the
STOP button two
times, open the disc tray or turn off the DVD player.
