background image

Connections & Setup

20

       Chapter 1

0

INPUT

SKIP

1

2

3

4

5

6

7

8

9

INFO

MENU

GUIDE

CLEAR

VOL

CHAN

MUTE

POWER

 GO
BACK

OK

The Buttons on the Remote Control

0-9 (Number buttons) 

  Enter channel numbers and time settings directly through the

remote control.

To enter a two-digit channel, press the two digits. To enter a three-digit channel, press
and hold the first digit for two seconds until two dashes appear to the right of the
number, then add the second two. Example: to tune to channel 123, press and hold 1 for
two seconds, press 2, then press 3.

Arrow buttons (up, down, left, right)

 Press the arrow buttons to move through the

on-screen menu system.

CHAN (up and down) buttons

  Scan up or down through the current channel list.

Press once to change the channel up or down; press and hold to continue changing
channels.

CLEAR

  Removes any menu or display from the screen and returns you to

TV viewing.

GO BACK

   Returns you to the previous channel.

GUIDE  

Press GUIDE to make the GUIDE Plus+ system appear on the screen. Press

GUIDE again to remove it from the screen.

INFO

  Displays channel information.

INPUT

Changes your TV to its video input channel. The Video Input Channel is the

channel your TV must tune to in order for you to access a component that’s connected to
your TV’s VIDEO and AUDIO jacks. Example: to view a tape from your camcorder,
connect the camcorder to the TV’s AUDIO and VIDEO jacks with the audio/video cables.

MENU

  Displays the TV’s Main menu. You can also press and hold for 2 seconds to

display the GUIDE Plus+ system.

MUTE

   Lowers the volume to its minimum level. Press again to restore volume.

OK 

 When a menu is on the screen, press OK to select the item that

is highlighted.

POWER 

 Turns the TV on and off.

SKIP   

If you press this button before you change the channel, the TV waits 30 seconds

and automatically goes back to the original channel. Each time you press SKIP, you add
30 seconds (i.e, if you press SKIP two times before you change the channel, the TV waits
60 seconds and automatically turns back to the original channel). When you reach four
minutes and thirty seconds, pressing SKIP adds one minute. Press CLEAR to cancel skip
timer.

VOL (up and down) buttons  

Decrease or increase the TV’s volume.

1571963A.01 Setup

4/9/02, 12:59 PM

20

Summary of Contents for F19436

































































Reviews: