Chapter 2
23
Using the Remote Control
INFO
Brings up channel banner; press again to clear the screen.
INPUT
Press to toggle through the available input sources (VID1, VID2, FRNT,
CMP1 and DVI—press the CH+ or CH- button to resume TV viewing).
MENU
Brings up the Main menu.
Note:
If you've just turned on the TV, the digital tuner takes some time to get
ready (usually about 25 seconds). While the digital tuner is getting ready, you
won't see the items for functions corresponding to that tuner in the menus.
These items will show up once the digital tuner is ready.
MUTE
Reduces the TV’s volume to its minimum level. Press again to restore the
volume.
OK
When in the menu system, selects highlighted items. When watching TV,
freezes the picture until you press any button on the remote to resume normal TV
viewing. Please note that when you "unfreeze" you go back to live programming
(skipping any programming that occurred during the freeze).
ON•OFF
When in TV mode, turns the TV on and off. If in another component
mode (DVD or AUX•HD) and programmed, will turn the component on and off.
When pressed twice within two seconds, the ON•OFF button turns off most RCA
components.
PRESETS
Displays the Picture and Sound preset settings. Use the up and down
arrow buttons to highlight either Picture or Sound settings. Use the left and right
arrow buttons to change to a different Picture or Sound preset.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE
If programmed, provides
transport control for some remote-controllable VCRs and DVD players.
SLEEP
Displays the Sleep Timer. Each press adds an additional 15 minutes.
SKIP
Press once before changing channels and the TV will wait 30 seconds
before returning you to the original channel. Press repeatedly to add more time.
TV
Turns on the TV and puts the remote in TV mode. Also displays current
status.
VOL – or VOL +
Decreases or increases the TV’s volume.
Note:
The DVD and AUX•HD buttons also turn on
most RCA products.
Tip
To turn off all the RCA components connected
to the TV, press ON•OFF twice within two
seconds.
This feature works with most RCA products.
Tip
The indicator fl ashes when the remote
batteries are low and you press a button on
the remote.
A warning banner may also appear on the
screen when you press a remote button and
your batteries are low.