background image

71

Chapter 6: Other Information

Care and Cleaning

CAUTION: 

Turn OFF your TV before cleaning.

You can clean the TV as required, using a dry cloth. Be sure to occasionally dust the ventilation slots in the
cabinet to help assure adequate ventilation.

IMPORTANT: Do not allow liquid to come in contact with the TV, or allow liquid to run down the
screen and inside the TV. Also, never place drinks or vases with water on top of the TV. This could
increase the risk of fire or shock hazard or damage to the TV. Never use cleaning agents, they will
damage the TV.

• Damage caused in shipping or transit
• Service required as a result of improper installation, including incorrect or insufficient AC supply (please

consult the owner’s manual for power supply requirements).

• Installation or repair of antenna systems, cable converters, cable company supplied equipment, or other

components in a video system

• Set-up or adjustment on consumer controls, or damage caused by improper adjustments
• Damage caused by other system components
• Any panel that has been modified or incorporated into any other product
• Replacement of batteries on the remote control.
• Damage (including cosmetic damage), failure, loss or personal injury due to misuse, abuse, negligence,

improper maintenance or storage, or to acts of nature or other causes beyond our control. (Causes beyond
our control include but are not limited to lightning strike, power surges, power outages and water dam-
age.) 

• Image burn-in
• Repair or replacement of warranted parts by anyone other than an authorized service centers.
• Units purchased or serviced outside of the coverage area.
• Product where the original factory serial numbers have been removed, defaced or changed in any way.
• Product sold and labeled as “as is, where is” or similar disclaimer.

How you get service:

• Contact your dealer, or visit http://www.rcacommercialtv.com, or call 1-800-RCA-2161.
• Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is

within the warranty period must be presented to obtain warranty service. For rental firms, proof of first
rental is also required.

• To contact the RCA Commercial warranty center by E-mail : service@rcacommercialtv.com

Product Registration:

• Please complete and mail the Product Registration Card packed with your TV or register online at

http://www.rcacommercialtv.com. It will make it easier to contact you should it ever be necessary.
The return of the card is not required for warranty coverage.

THIS LIMITED WARRANTY DOES NOT APPLY TO:

Chapter 6

Summary of Contents for J32LED750













































































Reviews: