3
Minimum Installation Requirements
Minimum Requirements
•
Input Voltage:
100 ~ 120VAC ~ 60Hz, 48 W
•
Output Voltage:
24 ± 0.5VDC / 2A.
•
Standby power consumption:
≤0.5 W
•
DC ripple:
100mV (P-P)
•
Ambient Temperature:
-10 ~ + 50 °c
•
Large, full metal casing provides excellent heat dissipation to protect the electrical power
components.
•
Overload and output short circuit protection
•
Frequency bandwidth:
5 ~ 1000MHz
•
Throughput loss:
≤0.5 dB
•
Band flatness:
± 0.5dB
•
Return loss:
≥ 13dB
•
Input / Output impedance:
75 Ω
ADDITIONAL NOTES:
Contact RCA Commercial for a complete list of compatible arm models that can be used with
this wall bracket power supply.
The JPS24D is an efficient switching power supply that provides DC24V / 1 A supply output
combined with the TV input signal on a COAX output. This product is used in hospitals, hotels,
RVs, boats, and other television signal transmission systems incorporating the RCA J14HV840
television designed to be powered over the COAX cable.
At the time of this printing, these configurations have been evaluated and tested by Under-
writers Laboratories. Other means of mounting may be potentially hazardous.
ARM MODEL NOTES:
SPECIFICATIONS
Overview & Cleaning
CLEANING :
Clean the exterior of this mount by removing dust with a lint-free cloth. For further cleaning,
use a soft cloth or paper towel dampened with water.
CAUTION :
To avoid damage to the surface of the mount, do not use abrasive or chemical cleaning agents.
DISINFECTING :
Do not immerse this mount, rather clean with a soft damp cloth. To avoid damage to the
surface of the mount, test a small portion of the mount’s cabinet with any new disinfectant to verify that the
disinfectant will not discolor or soften the enclosure.
This apparatus with class I construction shall be connected to a main socket outlet with a protective earthing
connection.
CLEANING & DISINFECTION:
