Mount Installation Instructions
4
Mount Installation
GUIDELINES
1.
LOCATION
– Make certain that the CATV jack is near
enough to the wall bracket so the “RF IN” cable can
be connected to it. Also position the wall bracket near
an AC wall outlet at a mounting height of 47±2 inches.
See Figure 1.
2.
WALL STRENGTH
– These wall bracket mounting
instructions installation directly into concrete walls.
IN ALL CASES
the wall construction must be able
to support a minimum loading of 350 PSI applied
perpendicular to the mounting hole locations by
compression or tension. Some wall construction may
require internal bracing to accept the minimum loading
required.
3.
HARDWARE REQUIREMENTS
– Mounting fasteners
are NOT supplied with the wall bracket.
4.
TOTAL MAXIMUM WEIGHT
of the TV receiver and
support arm system cannot exceed 41 lbs.
1.
All threaded rods, bolts or machine screws
will be ¼”-20UNC-2A thread or equivalent.
2.
All threaded rods will be finished off with an
acorn nut
30”
Minimum
Clearance
Mounting Height
Figure 1.
Mounting Hole Pattern
COMMON WALL
47
±
2”
4 ”
8” 10”
6 ”
1
⁄
2
3
⁄
8
