Display SmartResume
(RCA Models Only)
When you stop CD play or power off the
unit (without disconnecting power supply)
or if CD compartment lid is opened,
SmartResume is automatically activated. It
stores all the current settings and modes:
current track, Shuffle, time display, Mode
(Repeat/Repeat All/Program), and ESPX.
When play mode is on again, the unit
RESUMES to the settings (unchanged) and
plays from the beginning of the track.
Repeating
You can replay the entire CD, repeat one
track as many times as you wish or listen
to the beginning of each track for 10 sec-
onds.
Press
MODE
successively to
1. Replay the entire CD .
2. Replay the current track
3. Replay the beginning of each track
for 10 seconds
(The number of the track being played will
be displayed and SCAN will appear.)
4. Press again to the function de-select
Program
This function lets you listen to the tracks
you selected in the order you want. The
CD player must be in Stop mode.
1. Press
PROG
. P will appear in the display.
2. Select the track to store by pressing
& press
PROG
again to
confirm.
3. Return to step 2 to store other tracks.
4. Press play button to listen to your
programming.
Note : The unit switches off automatically
after 10s if no key has been activated. In
order to prevent excessive battery con-
sumption, the unit can switch off if you do
not press any key within 10s when pro-
gramming your unit. If the unit swithes
off, the programme will be stored in mem-
ory. Resume programming as normal by
turning the unit on again.
You can program up to 24 tracks.
To play your program again, press play.
To add/edit tracks to the program, go to
stop mode ; press and hold
PROG
button
again. Refer to step 2 of the above para-
graph.
6
THE CD PLAYER
EN
or
RP2376 7/20/00 4:27 PM Page 9
