9
Instruction Manual
FUNCTIONS & FEATURES
Power On/Off
1. Power On
Plug in the power cord, and press the MAIN POWER SWITCH on the front of the TV to turn the power on.
2. Standby (Soft Off)
With the main power ON, press the Standby button on the remote control. This will put the TV in “Standby” or “soft off”
mode. The red indicator light on the TV set will NOT turn off. To turn the TV on again, simply press the Standby key on
the remote control, or press one of the CH +/ - keys on the TV set.
3. Power Off
With the power ON or in Standby mode, press the MAIN POWER SWITCH on the front of the TV set to completely turn off
the power to the TV set. The red indicator light on the front of the TV set will turn off. When turned back on, all settings
are reset. If previously set, the time must be re-entered.
4. Auto Off
If the TV is ON (not Standby mode), and there is no signal coming into the TV set for 15 minutes, the TV will turn off.
Tuner Mode
Pressing the
key on the remote control while in Tuner mode will cause the channel number, antenna mode, and clock
to appear in the upper right corner of the screen. To remove, press
again.
Video Mode
Pressing the
key on the remote control while in Video Mode will cause the word
Video
and the clock to be displayed.
Press
again to remove.
Video
will continue to be displayed if no video signal is present.
On Screen Display
Changing the Channel
While in Tuner mode, press the CH +/ - keys to change the channel, or use the number buttons to enter a new channel.
For
channels over 99, press the 100+ button and then the last two digits of the channel.
Adjusting the Volume
To adjust the volume, press the VOL +/ - keys. Also, you may press the FUNCTION (F) key along with the VOL +/ - keys to
adjust the volume in increments of 4.
Muting the Volume
To mute the volume, press the MUTE key. To restore the volume, press MUTE again or press the VOL + key.
Basic Functions
Function Selection Menus
All Function menus can be accessed by pressing the MENU key on the remote control or front panel. When finished,
press the MENU key until the screen clears
.