the
REVERSE
key is pressed, the
illuminated
ON•OFF
key blinks.
Note:
If you accidentally press
the
REVERSE
key after your
component responds, press and
release the
FORWARD
key. Then,
wait two seconds to see if your
component turns off again.
10. Once your component turns off,
you have found the correct code.
You must save the new code by
pressing and releasing the
STOP
key. The illuminated
ON•OFF
key
turns off.
You must press the
STOP
key to save the code or the
correct code will not be stored!
11. To confirm that the component
key is programmed with the
correct code for maximum
functionality, test the component.
Attempt to control a variety of the
component’s functions with the
remote. If some of the features of
your components do not work,
different codes in the list can be
tried until you find the code that
allows the remote to control the
majority of your component’s
functions. See the section entitled
“Testing the Code for Maximum
Functionality” on page 8 for
more information.
Programming Methods (continued)
VCR
•
DVD
VCR
•
DVD
ON•OFF
(BLINK)
!
11
10
ON
•
OFF
ON•OFF
(BLINK)
SAT
•
CBL
VCR
•
DVD
TV
PLAY
FORWARD
REVERSE
ON•OFF
(BLINK)
ON•OFF
(BLINK)
VCR
•
DVD
ON•OFF
(BLINK)
a. Press and hold the
VCR•DVD
key. The illuminated
ON•OFF
key turns on.
b. While holding down the
VCR•DVD
key, press and
release the number 2 key on
the keypad to control a VCR or
the number 3 key to control a
DVD. The illuminated
ON•OFF
key turns off.
c. Release the
VCR•DVD
key.
The illuminated
ON•OFF
key
blinks four times and then
turns off. Your remote is now
either in VCR or DVD
Programming Mode,
depending on which you
chose. Proceed to step 4.
4. Press and hold the component key
(
TV
,
VCR•DVD
,
SAT•CBL
) you
wish to program. The illuminated
ON•OFF
key turns on and
remains on.
5. While holding the component key
down, press and hold the
ON•OFF
key. The illuminated
ON•OFF
key
turns off.
6. After holding down both keys for
three seconds, the illuminated
ON•OFF
key turns back on.
7. Release both keys. The illuminated
ON•OFF
key remains on.
TIP:
Throughout the programming
of each key, be sure to keep the remote
pointed at the IR sensor of the
component you are currently
programming the remote to control.
8. Press and release the
PLAY
key,
then wait five seconds to see if
your component turns off. If your
component does not respond,
continue to press the
PLAY
key
every five seconds until your
component turns off. Each time
you press the
PLAY
key, the
illuminated
ON•OFF
key blinks
and a block of 10 codes are sent to
your component. This process
continues until all of the codes in
the Code Lists have been searched.
(If your component has not turned
off after all codes have been
searched, the illuminated
ON•OFF
key blinks four times and turns
off. The Auto Code Search Entry
method is exited.)
9. When your component turns off,
you know the correct code is in
the last block of 10 codes sent.
Press and release the
REVERSE
key. Wait two seconds to see if
your component turns on again. If
your component does not respond,
continue to press the
REVERSE
key every two seconds until your
component turns on again. This
will isolate the correct code in the
last block of codes sent. Each time
ON
•
OFF
STOP
Once you’ve programmed the remote to control your
components, you may want to record the codes for future
reference. If you used the Direct Code Entry method, this is
easy. Just find the codes you programmed in and make a note
of them in the boxes on the next page. If you used one of the
Code Search methods to program your remote, you will need
to retrieve each component’s four-digit code. Retrieving the
actual code and writing it down will save you time if you
ever need to program the remote again (e.g., if programming is
lost when you change the batteries). If the codes are recorded,
you can use the Direct Entry method to reprogram your
remote to control your components, which is quick and easy.
1. Press and hold the component key
(
TV
,
VCR•DVD
,
SAT•CBL
) whose
code you wish to retrieve. The
illuminated
ON•OFF
key turns on.
2. While holding the component key
down, press and hold the
INFO
key. The illuminated
ON•OFF
key
turns off.
3. After holding down both keys for
three seconds, the illuminated
ON•OFF
key turns back on.
4. Release both keys. The illuminated
ON•OFF
key remains on.
Code Retrieval
INFO
ON•OFF
ON•OFF
SAT
•
CBL
VCR
•
DVD
TV
RCR311B_NA_IB_REVB_K4.qxd 7/27/04 11:46 AM Page 10
