5. Starting with the number 1 key,
press and release each number key
on the keypad in the following
order (1-9, then 0). The number
that causes the illuminated
ON•OFF
key to blink is the first
number of the code. As you find
each number of the code, refer to
the code boxes below and write
them down for future reference.
Note:
All TV codes begin with the
number 1; all VCR codes begin
with the number 2; all DVDs, the
number 3; and all satellite
receivers and cable boxes, the
number 5.
6. Repeat step 5 until you have
retrieved all four numbers in
the code.
7. After the fourth number is
retrieved, the illuminated
ON•OFF
key blinks briefly, then turns off.
8. To exit the Code Retrieval Mode,
press and release the
GO BACK
key at any time.
9. If you press an invalid key during
the Code Retrieval process, the
remote will not respond. If you do
not press a valid Code Retrieval
key (
TV
,
VCR•DVD
,
SAT•CBL
,
INFO
,
GO BACK
), Code Retrieval
times out after 15 seconds. The
illuminated
ON•OFF
key blinks
four times, and then turns off.
13
12
Because this remote controls more than one component, you
must first “tell” the remote which component you wish to
operate. That means, if you wish to operate your TV, you
must first press the
TV
key to put the remote in the TV Mode.
The remote stays in the chosen component mode (such as TV
Mode) until you change it. If your remote is in TV Mode, you
must change the mode in order to operate your DVD or VCR,
satellite receiver or cable box. For example, if you are in VCR
Mode, and you wish to turn off your TV, you must press the
TV
key first before pressing the
ON•OFF
key.
Using the Remote to
Control Your Components
GO BACK
TV CODE
1
SAT
·
CBL CODE
5
ON•OFF
ON•OFF
(BLINK)
VCR
·
DVD CODE
Code Retrieval (continued)
!
On-screen Menus
Sleep Timer (Select Models Only)
This feature automatically turns off your TV at a duration you
choose from 1 to 99 minutes. The Sleep Timer only works if
you have found a code that controls your TV. The timing
mechanism for the Sleep Timer is built into your universal
remote control. To program the Sleep Timer, follow these steps.
PROGRAMMING THE SLEEP TIMER
1. Press and release the
TV
key.
2. Press and hold the
SLEEP
key for
three seconds. The illuminated
ON•OFF
key turns on.
3. Release the
SLEEP
key.
4. Using the number keys, enter the
desired time in minutes (from 1-99
minutes). To set the timer to a
number under 10 minutes, first
press 0 and then the desired
number (e.g., 05 for five minutes).
The illuminated
ON•OFF
key
blinks with each keypress.
SLEEP
TV
ON•OFF
Accessing and Selecting Menu Items
Today’s advanced components use on-screen menus to help
you navigate through all their features and functions. While
this remote cannot access every menu system of every
component model, it does offer some menu functionality.
To use a component’s on-screen menu system, you first have
to put the remote in Menu Mode.
1. Make sure your components are
turned on and your TV is set to
the component’s input. (Use the
INPUT
key to toggle through
video sources when in TV mode.)
2. Press the component key whose
menu you want to access.
3. Press the
MENU
key. The
illuminated
ON•OFF
key blinks,
indicating you are in the Menu
Mode.
4. Use the
VOL
+/-
and/or
CH
+/-
keys to navigate through the
on-screen menu system.
5. To make a selection from
the on-screen menu, press
the
MENU
or
OK
key to
select the highlighted item.
TIP:
If the remote doesn’t respond,
check to see that the illuminated
ON•OFF
key is still blinking. Note: it
times out after 20 seconds. If this
happens, just press the
MENU
key
again, and then retry your selection.
Exiting a Menu Mode
The remote automatically times out of Menu Mode after
20 seconds of inactivity (no keys being pressed). At that
time, the remote clears the displayed menu from the TV.
If you want to exit the Menu Mode yourself, press the
corresponding component key on the remote (
TV
,
VCR•DVD
,
SAT•CBL
). The illuminated
ON•OFF
key turns off.
MENU
VOL & CH
MENU
OK
ON•OFF
(BLINK)
SAT
•
CBL
VCR
•
DVD
TV
ON•OFF
(BLINK)
RCR311B_NA_IB_REVB_K4.qxd 7/27/04 11:46 AM Page 12
